ROTOR RHAWK/RRAPTOR Direct Mount Crankset Installation Manual

About this manual

This manual covers safety warnings, maintenance, warranty terms, frame compatibility, and installation steps for ROTOR RHAWK/RRAPTOR Direct Mount cranksets. It includes drive-side and non-drive-side assembly, OCP adjustment, tightening, and fine adjustment procedures.

The document also lists required tools and torque values, spacer selection guidance, and troubleshooting for lateral play or rough rotation. It is provided in Spanish and English. This manual is written in Spanish.

What's inside

• Safety Warning
• Maintenance
• ROTOR Warranty Policy
• Compatibility of RHAWK/RRAPTOR Cranksets with Frames
• Pre-Assembly Warnings
• Direct Mount Chainring Installation and OCP Adjustment
• Drive Side Installation
• Non Drive Side Assembly
• Tightening and Fine Adjustment
• Fine Adjustment

Specifications

Frequently asked questions

What torque is required for the crank arm bolts?

Tighten both the drive side and non drive side crank arm bolts clockwise with an 8mm Allen key to 35 Nm.

How is lateral play removed during non drive side adjustment?

Turn the preload nut clockwise until lateral play is eliminated, then secure it with the preload bolt; if play remains, add an additional 0.5mm plastic washer on the non drive side.

What should be done if the crankset does not rotate smoothly?

Remove a 0.5mm plastic washer from the non drive side and repeat the adjustment steps.

How long is the ROTOR warranty period?

ROTOR products and components are guaranteed for 2 years against manufacturer defects or defective materials.