This product must operate under the control of a micro motor, and is a polishing or grinding equipment for a dental laboratory. Features: 1. Does not heat up after long time use, high efficiency. 2. Has forward and reverse rotation during operation. 3. The output adjustment of the main unit can change the speed of the handpiece. 4. The maximum speed is 35000rpm.
The Woodpecker HS-1, HS-2 and HS-3 are micro motor handpieces intended to operate with a micro motor control unit. According to the manual, they are polishing and grinding equipment for dental laboratories, used on dentures, metals, prosthesis bases and inorganic materials; the handpiece cannot be used directly in the oral cavity. The manual gives model dimensions, torque and weight figures, and states a maximum speed of 35,000 rpm.
The Spanish-language manual explains installation and operation, including forward and reverse rotation and speed adjustment from the main unit. It also covers replacement of the chuck, carbon brushes and bearings, a troubleshooting table, storage and transport conditions, and after-sales service; the handpiece has a one-year warranty that excludes normal wear of bearings, carbon brushes, chuck, shafts and housing. This manual is written in Spanish.
| Power input | DC 30 V |
|---|---|
| Maximum speed | 35,000 rpm |
| Torque | HS-1: 3.0 Ncm; HS-2: 3.2 Ncm; HS-3: 2.4 Ncm |
| Weight | HS-1: 210 g; HS-2: 210 g; HS-3: 163 g |
| Dimensions (HS-1) | Ø28 mm x 153 mm |
| Dimensions (HS-2) | Ø27.5 mm x 154.6 mm |
| Dimensions (HS-3) | Ø24.8 mm x 96.8 mm |
| Operating ambient temperature | 0°C to 40°C |
| Relative humidity | ≤80% |
| Atmospheric pressure | 50 kPa to 106 kPa |
The maximum speed is 35,000 rpm.
No. The manual states it is a polishing and grinding device for dental laboratories and cannot be used directly in the oral cavity.
The replacement cycle is one year, but it can depend on daily working hours and load conditions.
The handpiece has a one-year warranty.