The document is an instruction manual for the Electrobloc EBL 208 S G from Schaudt GmbH.
The Schaudt Electrobloc EBL 208 S G is an electrical management system for motorhomes and caravans, combining a charger module, 12 V distribution, fuses, battery monitor, and control functions. It operates on 230 V AC mains and supports lead-acid or lead-gel batteries of at least 55 Ah.
The manual covers safety information, operation of the battery cut-off switch and battery selector switch, charging via mains, solar, and alternator, maintenance, troubleshooting, and technical specifications including charging curves and voltage thresholds.
| Mains connection | 230 V AC ± 10%, 47–63 Hz sinusoidal, protection class I |
|---|---|
| Suitable batteries | 6-cell lead acid or lead gel batteries, at least 55 Ah |
| Closed circuit current | Approx. 1 mA with control panel |
| Living area battery charging curve | IUoU |
| Living area battery final charging voltage | 14.3 V |
| Living area battery charging current | 18 A |
| Living area battery float charge voltage | 13.8 V with automatic switching |
| Starter battery float charge current | Max. 2 A |
| Solar charging max current | 14 A (fuse-protected by 15 A fuse) |
| Battery monitor breaking voltage | Approx. 10.5 V |
| Battery monitor minimum voltage for 12 V main switch | Approx. 11.0 V |
The Electrobloc requires a 230 V AC ± 10%, 47–63 Hz sinusoidal mains supply with protection class I.
It supports 6-cell lead acid or lead gel batteries with a capacity of at least 55 Ah.
The living area battery is charged at 18 A using the IUoU charging curve.
The battery monitor breaks at approximately 10.5 V.