The AquaCaddy LA10150 is a water treatment device manufactured by Isopure Corporation. This user manual provides instructions on how to install and operate the device.
The AquaCaddy is an all-in-one water treatment system that processes water and provides pre-treated water for the AquaC UNO H. It consists of an inlet filter, water softener, worker carbon, polisher carbon, and pre-RO filter. The manual lists two AquaCaddy models: PTX-C-CBCB-B with dual carbon blocks and PTX-C-CTCB-B with a worker carbon tank and polisher carbon block.
This user manual, manual part LA10150 version 1.00, covers warnings and safety statements, specifications, model chart, theory of operation, diagrams, installation, operation, transport, alarms, troubleshooting, replacement parts, and preventative maintenance.
| Maximum inlet water pressure | 6 bar (87 psi) |
|---|---|
| Inlet flow requirement | 340 Liter per hour (1.5 gallons per minute) |
| Inlet water temperature | +5 to +30°C (+41 to +86°F) |
| Inlet water connection | ¾” Female Garden Hose Thread |
| Softener drain connection | ¼” Hose |
| Power connection | 120VAC NEMA 5-15P Plug |
| Maximum relative humidity | 80% at 20°C, non-condensing |
| Minimum ambient temperature | 60°F (10°C) |
| Maximum ambient temperature | 85°F (32°C) |
| Wet weight | 161kg (355lbs) |
| Inlet filter rating | 5 microns |
| Pre-RO filter rating | 1 micron |
The maximum inlet water pressure is 6 bar (87 psi).
The PTX-C-CTCB-B model uses a worker carbon tank and a polisher carbon block.
No, the manual states there are no alarms associated with the AquaCaddy.
The inlet flow requirement is 340 liters per hour (1.5 gallons per minute).