Invacare® TheraPure™ Side Entry Whirlpool Tubs User Manual.
This user manual covers the Invacare TheraPure Side Entry Whirlpool Tubs, models 3602GXL and 3652G. It explains the symbols and signal words used, the limited warranty, safety guidelines, product features and labeling, typical product parameters, floor space and clearance requirements, and dimensions.
Installation sections describe preparing the work area, hook-up locations, securing and leveling the tub, and electrical and plumbing installation with a post-installation checklist. Operating instructions cover cleaning and disinfecting, opening and closing the tub door, shoulder and waist straps, water temperature setting, filling the tub, the shower/massage wand and the whirlpool function, followed by safety inspection checklists, troubleshooting and a maintenance record.
| Maximum hot water supply temperature | 110°F (43°C) |
|---|---|
| Floor load capacity | 16.5 pounds per square inch (11.4 N/cm2) |
| Product warranty period | 3 years from date of purchase |
| Door seal warranty | Life of the tub |
| Recommended bath duration | 5 to 10 minutes |
| Compatible bath lift | Traverse Lift Model 1900 ONLY |
The recommended length of time spent in a bath is 5 to 10 minutes. If nausea, dizziness or a headache develops, get out at once and seek medical attention if symptoms persist.
The hot water supply must not exceed 110°F (43°C) to protect the user from scalding.
Check and reset the breaker, and reconnect the switch air hose to the switch and controller. If the problem is not remedied, contact technical support at 1-800-668-2337, Extension 2.
Only the Traverse Lift Model 1900 is recommended; bath lifts from other manufacturers are not to be used with the tub.