OpenComm bone conduction headphone user manual
The OpenComm is a bone conduction headset by AfterShokz. This user guide explains how to charge, pair, and connect the headset, and how to use its buttons for calls and music.
The guide also covers NFC pairing, multipoint pairing for two devices, LED indicator meanings, moisture detection, storage and maintenance, and warranty information.
| Part number | ASC100 |
|---|---|
| Speaker type | Bone conduction speaker |
| Frequency response | 20Hz~20KHz |
| Bluetooth version | 5.0 |
| Microphone type | Dual DSP noise-canceling mic |
| Bluetooth range | 10 m |
| Weight | 33 g |
| Battery type | Lithium battery |
| Charge time | 60 mins |
| Compatible profiles | A2DP, AVRCP, HSP, HFP |
| Battery capacity | 170 mAh |
| Charge voltage | 5V±5% |
| Water resistance | IP55 |
| Listen time | Up to 8 hours |
| Talk time | Up to 16 hours |
| Standby time | Up to 14 days |
| Warranty | 2-year |
Use the included magnetic induction cable to charge the headset. The LED indicator changes from red to blue when charging is complete.
Start with the headset powered off, then press and hold the volume+ button until OpenComm says "pairing" and the LED flashes red and blue. Select "OpenComm by AfterShokz" in your device's Bluetooth menu.
If moisture is present on the charging port while charging, the headset vibrates with an audible "beep" warning.
Press and hold the Multifunction Button and volume+ button for 3 seconds until you hear "multipoint enabled," then pair each device separately.