The OTN electronic thermostat is an electronic thermostat for mounting in standard wall box. It is adjustable to required temperature from +5/+40°C. The LED shows that the heat is ON.
The Elektra Type OTN is an electronic thermostat for mounting in a standard wall box, available as OTN-1991-EKL with floor sensor and OTN-1999-EKL with built-in sensor. It is adjustable from +5 to +40°C and uses ON/OFF regulation with a 0.4°C hysteresis.
The document covers sensor and thermostat mounting, electrical connections, setback temperature, temperature setting and adjustment, maximum/minimum temperature locking, and technical specifications.
| Voltage | 230V AC +10/-15%, 50/60 Hz |
|---|---|
| Current consumption | 6 VA |
| Max. fuse | 16A |
| Built-in switch | 1-pole, 16A |
| Output relay | SPST-NO |
| Load OTN-1991-EKL | 16A, 3600W |
| Load OTN-1999-EKL | 16A, 3600W |
| Regulation principle | ON/OFF |
| Temperature scale | +5/+40°C |
| Hysteresis | 0.4°C |
| Setback temperature | Fixed 5°C |
| Error circuit fuse | -20°C |
| Ambient temperature | 0/+50°C |
| Dimensions | H/80, W/80, D/50 mm |
| Protection | IP20 |
The thermostat is adjustable from +5 to +40°C.
Setback is activated by a 230 V signal from an external time switch to terminal 5.
The fault interrupter circuit interrupts heating.
The hysteresis is 0.4°C.