Castrol CareCut™ ES 2 is a non-chlorinated, non-metallic pure oil cutting fluid that uses advanced technology bio-based ester additives. It is designed for high speed grinding, creep grinding, gear grinding and drilling of non-ferrous and ferrous metals, as well as general machining.
Castrol CareCut ES 2 is a pure oil cutting fluid formulated without chlorine or heavy metals, using advanced bio-based ester additives. It is designed for high-speed grinding, creep-feed grinding, gear grinding, drilling, and general machining of cast iron, low-to-high alloy steels, nickel-chromium alloys, titanium alloys, aluminum alloys, and copper alloys.
The fluid features low mist and low foam even under high pressure and flow, excellent flushing and lubrication for surface finish and extended honing stone life, low viscosity and wetting to reduce carry-off, good filterability and oxidation stability for longer fluid life, and a high flash point (>200°C) with low odor and light color for improved operator environment. Typical data includes viscosity 8.8 mm²/s at 40°C, density 868 kg/m³ at 15°C, and copper corrosion rating 1b. Storage should be under cover, below 60°C, and away from direct sunlight. This manual is written in Chinese.
| Appearance | Colorless |
|---|---|
| Viscosity at 40°C | 8.8 mm²/s |
| Viscosity at 100°F | 57 SUS |
| Density at 15°C | 868 kg/m³ |
| Flash Point (open cup) | >200 °C / >390 °F |
| Copper Corrosion | 1b |
| Additives | Ester, active sulfur, inactive sulfur, phosphorus, calcium; no chlorine, no zinc |
It is suitable for cast iron, low-to-high alloy steels, nickel-chromium alloys, titanium alloys, aluminum alloys, and copper alloys.
Yes, the formulation contains no chlorine or heavy metals.
The open cup flash point is greater than 200°C (390°F).
Viscosity is 8.8 mm²/s at 40°C and 57 SUS at 100°F.