Adhesive Tape Holding Force Tester User Manual

Adhesive tape holding force tester is used for static load test of adhesive tape adhesion to understand the holding time of adhesive force of finished product under certain load, and to evaluate the durability and service life of adhesive tape adhesion.


Adhesive Tape Holding Force Tester User Manual - cover page
Category
Other
Document type
User Manual
Language
Chinese
Pages
6
File format
PDF
File size
223 KB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
297AD1C7E3630803BD91E6FA3FA6E8DF

About this manual

This is a Chinese-language user manual for an adhesive tape holding force tester (胶带保持力试验机) with five test positions that are timed separately. The machine performs a static load test on tape adhesive to find how long the adhesive holds under a fixed load, so that the durability and service life of the tape can be evaluated.

The manual lists the technical parameters, explains the machine structure, and describes the operating procedure: cutting specimens, cleaning and preparing the test plate, rolling the specimen with the 2000 g roller, hanging a 1000 g load and measuring the slip after one hour with a 0.05 mm vernier caliper. It ends with maintenance notes, precautions and a product inspection certificate recording the serial number and the inspection values for the timer, weights, roller and specimen. This manual is written in Chinese.

What's inside

  • Overview
  • Technical Parameters
  • Machine Structure
  • Operating Procedure
  • Maintenance and Precautions

Specifications

Load1000 g ± 10 g (including the weight of the loading plate)
Timing range0–1000 h
Test positions5, timed separately
Test plate50 × 70 × 1.5 mm, 5 plates
Pressure rollerWidth 45 mm, diameter 82 mm, mass 2000 ± 50 g, covered with a rubber layer about 6 mm thick
Test specimen plateSUS 304 steel, thickness 1.5–2.0 mm, cut to width 50 mm and length about 125 mm
Timer value on inspection certificate999999

Frequently asked questions

What is the adhesive tape holding force tester used for?

It is used for a static load test on tape adhesive, to find how long the adhesive holds under a set load and to judge the durability and service life of the tape.

What load is hung on the specimen during the test?

A load of 1000 ± 10 g is hung on the folded end of the specimen so that the load is applied evenly.

How are the specimens cut and applied?

Three specimens of 25 mm × 150 mm are cut without touching the adhesive surface, the test plate surface is cleaned and dried, and the specimen is pressed onto one end of the plate over a 25 × 25 mm area.

How many tests are run and how is the result obtained?

The test is run three times and the average value is taken as the holding force.

Download PDF (223 KB)

Also Manuals