This manual is a maintenance manual for Toyota's 1GR-FE engine. It details the disassembly, assembly, and maintenance methods of each component of the engine, and provides the disassembly and installation torque values of each component.
This is a single-page Spanish-language torque and adjustment catalog sheet for the Toyota 1GR-FE DOHC engine (3956 cc), identified under reference HG-8062070/1-MLO and listed for the Land Cruiser, New Prado and Tundra. It collects tightening sequences, torque values and assembly clearances in one table-style layout.
The page gives the cylinder head tightening order, torque figures for the main bearing caps, flywheel, oil pan, connecting rod, pulley, camshaft gear, water pump, alternator and A/C compressor, plus special data such as thermostat opening temperature, oil pressure, ignition timing and idle speed. It also lists timing marks, cylinder head bolt length and diameter limits, and the additional gaskets and seals offered for the engine. This manual is written in Spanish.
| Thermostat opening temperature | 80 - 84 °C |
|---|---|
| Oil pressure | 2.9 - 5.9 bar at 3000 rpm |
| Compression ratio / compression pressure | 10:1 / 145 - 193 psi |
| Ignition timing and idle speed | 10° apms / 700 rpm (Toyota TCCS / Map DI) |
| Maximum cylinder head bolt length | 143.7 mm |
| Minimum cylinder head bolt diameter | 10.4 mm |
| Pulley torque | 184 lb-pie |
| Connecting rod axial play | 0.15 - 0.30 mm (0.005 - 0.011") |
The sheet gives 2.9 to 5.9 bar at 3000 rpm.
The thermostat opening is listed as 80 to 84 °C.
It is headed for the Land Cruiser, New Prado and Tundra, and the application table also lists FJ Cruiser, Hilux, Tacoma and 4Runner.
The maximum bolt length is 143.7 mm and the minimum diameter is 10.4 mm.