This document is the Wilo-Drain STS 65 user manual
This document provides installation and operating instructions for the Wilo-Drain STS 65 submersible pump. It serves as an integral part of the product and must be kept readily available at the installation site. Strict adherence to these instructions is required for proper use and correct operation, ensuring safety and preventing damage to the pump or installation.
| Mains voltages | 1 ~ 230 V, ± 10 %, 3 ~ 400 V, ± 10 % |
|---|---|
| Mains frequency | 50 Hz |
| Protection class | IP 68 |
| Operating mode S1 | Motor submerged Without cooling jacket |
| Operating mode S3 | Motor on surface 25 % in sumps up to max. Ø3 m |
| Permitted temperature range of fluid | +3 to 40 °C |
| Noise level at min. level | < 70 dB(A) |
| Seal on fluid side | Mechanical seal SiC/SiC |
| Seal on motor side | Rotary shaft seal or mechanical seal Cr-cast/carbon |
No, owing to the materials used, the pumps are not suitable for potable water.
No, the pump must not be used for draining swimming pools, garden ponds or similar installations if there is someone in the water.
The recommended switching frequency is 6 1/h.