The document introduces the specifications of the MX series modular filters, including materials, ports, condensate capacity, installation method, working temperature, condensate drainage method, working pressure, nominal flow, filtering element pore size, residual oil content, oil retain efficiency, particle retain efficiency, fluid, pre-filter and other information.
This document is the Coalescing Filters Series MX section of Camozzi's North American FRL Catalog (Release 8.5). It covers the MX2 and MX3 modular coalescing filters, which use NPTF ports from 3/8" to 1" and offer cartridge filters of 1 µm or 0.01 µm, air quality according to the ISO 8573-1 standard, and manual, depressurizing, automatic and ported condensate drain options.
The pages include general data, a table of materials, the model coding system (e.g. MX2-3/8-FC00TF), flow diagrams for MX2 and MX3 with 1 µm and 0.01 µm elements, and a dimension table for the five listed models. A configurator is available on Camozzi's website at catalogue.camozzi.com for selecting single components or assembled FRLs.
| Ports | 3/8" - 1" NPTF (MX2: 3/8", 1/2", 3/4"; MX3: 3/4", 1") |
|---|---|
| Condensate capacity | MX3: 85 cc (approx. 3 oz.); MX2: 55 cc (approx. 1.9 oz.) |
| Operating temperature | -5°C to 50°C at 16 bar; -5°C to 60°C at 10 bar |
| Operating pressure | 0.3 - 16 bar (1.5 - 12 bar with automatic drain) |
| Porosity of filtering element | 0.01 µm or 1 µm |
| Residual oil content (inlet at 3 mg/m3) | < 0.01 mg/m³ (0.01 µm element); < 0.1 mg/m³ (1 µm element) |
| Oil retain efficiency | 99.80% (0.01 µm); 97% (1 µm) |
| Particles retain efficiency | 99.99999% (0.01 µm); 99.999% (1 µm) |
| Fluid | Compressed air |
| Body / filtering element materials | Aluminium body; borosilicate filtering element; NBR seals |
| Weight | MX2 models: 0.5 kg; MX3 models: 0.8 kg |
Condensate can be drained manually, automatically, by depressurizing, or through a port. The coding uses 0 = semiautomatic-manual, 3 = automatic, 5 = depressuring with filtered orifice, and 8 = without drain with a 1/8 port.
Cartridge filters of 1 µm or 0.01 µm are available. The 0.01 µm element gives residual oil content below 0.01 mg/m³ with 99.80% oil retain efficiency, while the 1 µm element gives below 0.1 mg/m³ with 97% efficiency.
For the 1 µm element, a 5 µm filter is recommended; for the 0.01 µm element, a filter with residual oil of 0.1 mg/m³ is recommended.
The code gives series and size (2 = 3/8"-1/2"-3/4", 3 = 3/4"-1"), port, FC for coalescing filter, filtering element (0 = 0.01 µm, 1 = 1 µm), drain type, and TF for NPTF ports, e.g. MX2-3/8-FC00TF.