The QCT and QCB Guide Cylinder Series features integrated guides for double-acting, magnetic piston, guided cylinders with diameters of 20, 25, 32, 40, 50, and 63 mm. These actuators are suitable for use in very limited space and are available in two versions: The QCT version, with sintered bronze bushings, is suitable for use when high side loads are applied to the cylinder. The QCB version, with linear ball bearings, is suitable for high precision and fast cycling applications. Both versions are equipped with fixed cushioning to prevent direct impact with the end covers. The design of the cylinder body allows the cylinder to be mounted using either the top, bottom, or side faces. Several “T” shaped grooves in two faces allow sensors to be fitted in a number of positions. Out of standard strokes are available only on demand.
This Camozzi catalogue documents the Series QC cylinders with integrated guide, which combine movement and guidance in one unit for use where space is limited. Two versions are described: QCT with sintered bronze bushes, suited to high side loads, and QCB with linear ball bearings for high precision and fast cycling. Both are double-acting with magnetic piston and fixed cushioning, in bores from 20 to 63 mm. The body allows mounting via top, bottom or side faces, and T-shaped grooves in two faces let sensors be fitted in several positions.
The catalogue also covers the QCTF and QCBF versions with double bearings and flanges in bores 20 to 40 mm, available with fixed mechanical cushioning or with shock absorbers. Contents include general data, standard stroke tables, a coding example, pneumatic symbols, tables of permissible loads and moments, and dimension tables for each bore size.
| Bore sizes (Series QC) | 20, 25, 32, 40, 50, 63 mm |
|---|---|
| Bore sizes (QCTF/QCBF) | 20, 25, 32, 40 mm |
| Operation | Double-acting, magnetic piston |
| Type of construction | Compact guided; QCT = sintered bronze bushes, QCB = linear ball bearings |
| Operating pressure | 1 ÷ 10 bar |
| Operating temperature | 0°C ÷ 80°C (with dry air - 20°C) |
| Speed | 50 ÷ 500 mm/s |
| Materials | Anodized aluminium body, zinc-plated steel flange, rolled stainless steel AISI 303 piston rod, PU seals |
| Fluid | Clean air, non lubricated; if lubricated, ISOVG32 oil |
QCT uses sintered bronze bushes and suits applications with high side loads, while QCB uses linear ball bearings for high precision and fast cycling applications.
They operate at 1 to 10 bar with clean, non-lubricated air; if lubricated air is used, ISOVG32 oil is recommended and lubrication must never be interrupted.
The guided Series QC cylinders are available in bores of 20, 25, 32, 40, 50 and 63 mm.
Yes, magnetic sensors can be mounted on both sides, with several T-shaped grooves in two faces of the body allowing sensors to be fitted in a number of positions.