P68 Putty is a kind of atomic gray that is suitable for alloy substrates. It has excellent adhesion and is suitable for bare zinc, aluminum, steel plate, welding seam, fiberglass and other substrates. It is easy to apply, easy to polish and dry quickly.
Prime P68 Putty is a putty for alloy substrates, including bare zinc, aluminum, steel plate, weld seams and fiberglass. The document states that it has good adhesion, is easy to sand and dries quickly, and is intended for professional use.
The manual describes mixing the base putty with hardener at 100:1–2.5 by weight, using the mixture within 3–5 minutes, applying layers no thicker than 0.1 cm, and sanding after about 25 minutes. It also lists usage precautions and storage and transport requirements, including storage below 25 °C for up to one year and a maximum stack height of seven layers. This manual is written in Chinese.
| Mix ratio (base putty to hardener) | 100:1–2.5 by weight |
|---|---|
| Usable time after mixing | 3–5 minutes |
| Maximum thickness per coat | 0.1 cm |
| Sanding time | About 25 minutes after application |
| Storage temperature and shelf life | Below 25 °C; one year |
| Maximum stack height | Seven layers |
Mix the base putty with hardener at 100:1–2.5 by weight and stir until the color is uniform.
Use it within 3–5 minutes; the usable time is affected by temperature and humidity.
Each coat must not exceed 0.1 cm.
Keep it sealed in a cool place below 25 °C; it can be stored for one year.