AkzoNobel Intertherm 2205 High-Temperature Epoxy Coating Product Data Sheet

AkzoNobel Intertherm 2205 is a low-VOC aluminum-filled epoxy coating for high-temperature steel maintenance from 60°C to 205°C, with service up to 230°C.


AkzoNobel Intertherm 2205 High-Temperature Epoxy Coating Product Data Sheet - cover page
Brand
AkzoNobel
Category
Chemical products
Document type
Datasheet
Language
Chinese
Pages
4
File format
PDF
File size
484 KB
Published
08 November, 2026
Updated
08 November, 2026
MD5 checksum
11A6E44E8EA8991CBC79A1850325655A

About this manual

Intertherm 2205 from AkzoNobel is described in this product data sheet as a low-VOC, low-surface-preparation, aluminum-filled epoxy-phenolic coating based on thermal diffusion epoxy technology. It is intended for maintenance and repair of pipes, valves, and tanks in high-corrosion CX environments, including service at up to 230°C (446°F) with thermal cycling, and can be applied directly to steel at 60°C to 205°C (140°F to 401°F).

The document covers surface preparation, aging coatings, mixing, application, drying times, coverage, system compatibility, safety, packaging, and storage. It notes that the coating is suitable for insulated and uninsulated steel surfaces, is not for tank lining or buried service, and should be applied by professional coating applicators. This manual is written in Chinese.

What's inside

  • Product Description
  • Intended Use
  • Coating Data
  • Regulatory Compliance Data
  • Surface Preparation
  • Application and Mixing
  • Product Features
  • System Compatibility
  • Safety Precautions
  • Packaging and Storage

Specifications

Volume solids85%
Typical dry film thickness100–200 µm (4–8 mils)
Theoretical coverage8.50 m²/L at 100 µm DFT
Mix ratio3.50 parts A to 1 part B by volume
Mixed usable life2 h at 10–15°C; 90 min at 25°C; 60 min at 40°C
Density1.34 kg/L (11.2 lb/gal)
VOC0.80 lb/gal (97 g/L), EPA Method 24
Shelf life12 months at 25°C (77°F)
Maximum operating temperature230°C (446°F), with thermal cycling
Application surface temperature60°C to 205°C (140°F to 401°F)

Frequently asked questions

What is the mix ratio for Intertherm 2205?

Mix 3.50 parts of the A component with 1 part of the B component by volume.

Can Intertherm 2205 be applied over hand- or power-tool-cleaned steel?

Yes. The document lists hand and power tool preparation standards including St2, St3, Sa2, Sa2½ and SSPC SP2, SP3, SP6, SP10, SP11.

What is the recommended total dry film thickness?

A minimum total dry film thickness of 200 µm is important, and the document recommends two coats.

What is the maximum operating temperature?

The coating is intended for equipment operating up to 230°C (446°F) with thermal cycling.

Download PDF (484 KB)

More AkzoNobel Manuals


View all AkzoNobel manuals →