Magnum XP-Vac is more versatile than any other professional steam cleaner. In addition to the suction and steam function, the hot water inflow can also be regulated con-tinuously using a control valve that allows you to set the wet effect on the device independently.
This manual describes the Magnum XP-Vac professional steam cleaner, which is intended for professional use as a steam generator and as a liquids/organic materials aspirator. It covers equipment description, important safety instructions, assembly, filling tanks, connecting tubes, and starting the steam function.
The document also lists combined functions, such as steam cleaning, suction, and hot water use, and provides technical data for electrical connection, output, temperature, pressure, tank capacity, hose length, weight, and size. It notes that O-rings should be changed approximately every 6 months.
| Nominal voltage | 120 V, 60 Hz |
|---|---|
| Total output | 1800 W |
| Boiler nominal consumption | 1000 W + 700 W |
| Automatic refill system | Yes, 3,8 litres / 1 gal |
| Steam temperature | max. 180 °C / 356 F° |
| Steam pressure | max. 10 bar (1000 kP a) |
| Motor nominal consumption | 1200 W |
| Capacity recovery tank | 8 litres / 2,11 gal |
| Underpressure | 2100 mm H2O/82,6 in |
| Length steam suction hose | approx. 3.2 metres / 118 in |
| Weight | approx. 26.2 Kg / 58 lbs |
| Size (l x w x h) | 744 x 468 x 920 mm / 29,3 x 18,4 x 36,6 in |
The manual advises changing the O-rings approximately every 6 months.
The manual states not to fill it with anything but clean tap water.
The heating symbol flashes during the heat-up phase, which is approximately 5 minutes.
It switches off after approximately 10 seconds.