DX-7 speaker system instruction manual. The system uses multi-layer wood frame to suppress the sound dyeing caused by resonance. The tweeter uses German ETON's magnesium-diaphragm tweeter speaker. The mid-bass uses German ETON's HEXACONE hexagonal honeycomb diaphragm speaker. The crossover uses high-purity copper foil inductance technology. The speaker system is designed with LEAP curve optimization
The CAV DX-7 is a speaker system described in this manual as a passive radiator box with ETON drivers. The manual lists main features including a cabinet with multi-layer wooden support, an ETON magnesium-diaphragm tweeter, ETON HEXACONE mid-bass drivers, a crossover with high-purity copper foil inductors, and LEAP curve optimization for the design.
The manual also provides technical specifications, two connection methods for one amplifier and for bi-wiring with two amplifiers, an operating guide, speaker placement instructions, notices, care instructions, and accessory information. The accessories include two 3.6-meter speaker connection cables. This manual is written in Chinese.
| Tweeter | 1x1” ETON magnesium-diaphragm |
|---|---|
| Midrange | 1x5.25” ETON three-layer hexacone sandwich cone |
| Bass | 2x8” ETON three-layer hexacone sandwich cone |
| Passive Radiator | 1x8” ETON three-layer hexacone sandwich cone |
| Sensitivity | 89 dB |
| Power Handling | 40W-200W |
| Impedance | 4 Ω |
| Frequency Range | 28Hz-20kHz |
| Dimensions | W 375xD551xH1200 mm |
| Net Weight | 75kg |
With the amplifier switched off, make sure the gold connection between the positive and negative posts is connected, then connect the cable matching the positive red and negative black poles before turning the amplifier on.
Remove the gold straps so the positive and negative posts are disconnected, connect one amplifier to the upper posts and the other amplifier to the lower posts, then turn the amplifiers on.
Place the speakers in front of the listener symmetrically with at least 1.5 meter between them, 20-50 cm from the wall, and the tweeter drivers at the listener's ear height.
The recommended area is 25 to 80 square meters with a height of 2.8 to 7.0 meters.