Instruction manual
This quick guide is for the Sage Barista Pro SES878 espresso machine. It begins with safety precautions for household use, then identifies the machine's parts, including the 250 g bean hopper, integrated conical burr grinder with 30 espresso grind settings, 54 mm stainless steel portafilter, 2 L removable water tank with a replaceable water filter, steam wand, LCD display and dedicated hot water outlet.
The guide describes the included accessories (milk jug, single and dual wall filter baskets, water filter holder, cleaning tablets and brush, Razor precision dose trimming tool), explains assembly and the first use flush cycle, and lists features such as the ThermoJet heating system, PID temperature control, low pressure pre-infusion and volumetric controls. A troubleshooting section covers problems such as coffee that is not hot enough, missing crema, water leaks and the machine stopping during operation. This manual is written in Chinese.
| Voltage | 220-240V, 50-60Hz |
|---|---|
| Power | 1380-1650 W |
| Bean hopper capacity | 250 g |
| Grind settings | 30 espresso grind settings, fine to coarse |
| Portafilter size | 54 mm stainless steel |
| Water tank capacity | 2 L removable |
| Heat-up time | 3 seconds to extraction temperature |
Sage recommends replacing the water filter after 3 months; set a reminder for the following month when installing it.
The cup or filter may not be preheated; rinse them under the hot water outlet. You can also raise the brew temperature in the settings.
The coffee beans or pre-ground coffee may not be fresh, or the grind may be too coarse. Use beans roasted 5-20 days ago, or pre-ground coffee within one week.
The thermal safety fuse may have activated due to pump or grinder overheating. Turn the machine off, unplug it, and let it cool for about 30-60 minutes.