This is a sewing machine user manual
This is the user manual for the JUKI LZ-2290A-SR sewing machine, used together with the IP-110(D) operation panel and the SC-916. It opens with the names of the machine parts and a specifications table for the machine head and the electrical box, followed by a list of the built-in sewing patterns and a table of initial settings for those patterns.
The manual then walks through installation, preparation before sewing, use of the operation panel and its pattern, thread-trimming and counter settings, adjustment of the machine, maintenance and a troubleshooting chapter that lists symptoms, causes and corrective measures. This manual is written in Japanese.
| Maximum sewing speed | 3000 sti/min |
|---|---|
| Maximum needle swing width | 10 mm |
| Maximum feed amount | 5 mm forward and reverse |
| Sewing patterns | 14 types, 20 patterns |
| Needle | 438 #75 |
| Machine oil | JUKI New Defiix Oil No.1 |
| Power supply voltage | Single-phase 200V/220V/240V, three-phase 200V/220V/240V |
| Rated current | 4.6A/4.3A/4.0A |
| Operating temperature and humidity | 0 to 40 °C, 90% or less |
The maximum sewing speed is 3000 sti/min.
Needle 438 #75 is listed as the needle in use.
The manual specifies JUKI New Defiix Oil No.1.
The troubleshooting table says the air pressure is too low and should be adjusted to 0.6 MPa.