This user manual introduces the basic operation of the AT827/AT828 LCR meter.
The AT827/AT828 is a handheld LCR meter controlled by a high-performance microprocessor, with a 2.8-inch color TFT-LCD and both keypad and touch-screen operation. This user's guide covers the installation and setup guide, an overview of the measurement functions, the front panel and interfaces, the [MEAS DISPLAY] measurement page, the [SETUP] page, the [OPEN SHORT] zeroing page, the [SYST] system configuration page, measurement examples, remote control and the command set, and the specifications. The AT827 offers test frequencies up to 10 kHz and the AT828 up to 100 kHz.
The instrument measures inductance, capacitance, resistance, complex impedance, quality factor, dissipation factor and phase, and can measure DCR at the same time, with 50,000-count main and secondary readouts and 0.2% basic accuracy. It provides open and short calibration, a main-parameter percentage comparator with beeper, and USB-HID and USB-VCOM interfaces with commands compatible with SCPI, so users can write their own software for remote control and data collection. Power comes from a rechargeable ATL805 lithium battery charged through a USB Type-C adapter with a minimum output of 5V DC, 3A. This manual is written in Chinese.
| Basic accuracy | 0.2% |
|---|---|
| Reading | 50,000 counts |
| Test speed | Slow 2.5 readings/s, fast 10 readings/s |
| Test frequency (AT827) | 50Hz, 100Hz, 120Hz, 1kHz, 2kHz, 10kHz |
| Test frequency (AT828) | 50Hz, 100Hz, 120Hz, 1kHz, 2kHz, 10kHz, 50kHz, 100kHz |
| Test signal level | 0.3V, 0.7V and 1.0V rms |
| Display | 2.8-inch color TFT-LCD with touch screen |
| Battery | Rechargeable lithium battery, model ATL805 |
| Battery operating time | 8 hours at 100% backlight, 11 hours at 50% backlight |
| Battery charging time | About 3 hours |
| Interface | USB, HID device class and VCOM virtual serial port |
| Charger requirement | USB Type-C adapter, minimum output 5V DC, 3A |
| Ranges | 8 ranges, automatic or locked |
The AT827 supports 50Hz, 100Hz, 120Hz, 1kHz, 2kHz and 10kHz; the AT828 adds 50kHz and 100kHz.
The instrument runs about 8 hours with 100% backlight and about 11 hours with 50% backlight.
It is charged with a USB Type-C charger whose output is at least 5V DC, 3A.
It supports open and short calibration, performed on the [OPEN SHORT] zeroing page.