This application manual introduces the application method of the eight-electrode body fat scale, including hardware reference design, Bluetooth interface, product definition, process and software protocol.
This application manual from Shenzhen Elink Things (易连物联网) describes the MCU-side algorithm of the AiLink eight-electrode body fat scale, document version V0.1 dated July 29, 2021. It is written for MCU-side developers who connect the company's BM series Bluetooth modules to the AiLink app.
The manual covers the hardware reference design including the UART serial port and the power-off and continuous-power connection methods, the Bluetooth name AiLink_xxxx, the product definition and the basic interaction flow. It then documents the A7 command set for weight status, impedance, heart rate, temperature, height, user information, body fat data, measurement completion and error codes, followed by the module general command set (Type 25/26, 27/28, 2C, 1D/1E, 1A, 19 and 37/38), examples, and production testing guidance using the BTS02 test box. This manual is written in Chinese.
| UART settings | 9600 bps, 1 start bit, 8 data bits, 1 stop bit, no parity |
|---|---|
| Supported firmware versions | BM02_V4.0.0, BM16_V4.0.0, BM28_V4.0.0 |
| BM28 current consumption | sleep 2.7 uA, working 163 uA, peak 3.17 mA |
| BM16 current consumption | sleep 8 uA, working 644 uA, peak 12 mA |
| Bluetooth name | AiLink_xxxx, where xxxx is the last 4 characters of the MAC address |
| A7 payload length | maximum 15 bytes |
| Impedance data precision | 1 Ω, big-endian |
It supports firmware BM02_V4.0.0, BM16_V4.0.0 and BM28_V4.0.0.
9600 baud, 1 start bit, 8 data bits, 1 stop bit and no parity.
The Bluetooth name is AiLink_xxxx, where xxxx is the last 4 characters of the MAC address.
A power-off method where the MCU controls the module GND, and a continuous-power method where the MCU uses UART commands to shut the module down into sleep.