Evaluation board manual for Taiyo Yuden's Bluetooth low energy module, including product introduction, circuit schematics, PCB layout and other information
This Taiyo Yuden manual covers the EBSHSN and EKS HSN evaluation boards for the EYSHSN Series Bluetooth low energy module. The mounted module measures 8.55mm x 3.25mm x 0.9mm maximum.
It provides the evaluation board schematic, layout, silkscreen printing, and pin descriptions. The manual also explains how to connect the board to a PC using one USB cable, measure current through CN6, configure the power supply, and use the USB-to-serial UART interface.
| Mounted module dimensions | 8.55mm x 3.25mm x 0.9mm max |
|---|---|
| Pin header pitch | 2.54mm |
| CN3 to CN4 distance | 15.24mm |
| Processor | Nordic nRF52832 ARM Cortex-M4F 32 bit |
| Default module power supply | 3.3V from 3V3OUT of FT232RQ |
The module power supply is 3.3V from 3V3OUT of FT232RQ, and power is possible with one USB cable.
Cut the shorting pins 1 and 2 of CN6 and connect an ammeter between the pins of connector CN6.
No, the module does not install a 32.768kHz crystal, though the internal 32.768kHz RC oscillator can be enabled instead.