Voltech AT Series Transformer Tester Fixture Construction Guide

This document introduces the components and principles of Voltech AT series transformer tester's fixture system.


Voltech AT Series Transformer Tester Fixture Construction Guide - cover page
Brand
Voltech
Document type
Installation Guide
Language
English
Pages
35
File format
PDF
File size
1.4 MB
Published
20 October, 2023
Updated
20 October, 2023
MD5 checksum
7411A50D33A5F5C2AE4D87AAD1045AC2

About this manual

This guide explains how to construct test fixtures for Voltech AT series transformer testers. It covers components like base plates and interface plates, wiring methods, and safety precautions. The guide also includes technical data for probes and pins, and maintenance tips to ensure accurate testing and long-term fixture reliability.

The document emphasizes Kelvin connection principles for accurate impedance measurements and provides detailed instructions for drilling, wiring, and assembling fixtures. It includes component specifications, probe selection charts, and guidelines for maintaining fixture cleanliness and mechanical integrity.

What's inside

  • Introduction
  • Principles of Kelvin Connections
  • Application and Specification
  • Fixture System Overview
  • Choosing Connecting Probes, Kelvin Pins and Clips
  • Fixture Construction
  • General Notes and Maintenance
  • Further Help and Advice

Specifications

Fixture SizeUp to 63.5mm square footprint, up to 63.5mm height
Connection MatrixUp to 60mm square
Supported Pitches1.27mm, 1.962mm, 2.00mm, 2.5mm, 2.54mm, 3.81mm

Frequently asked questions

What is the purpose of Kelvin connections in this guide?

Kelvin connections are used to measure impedance accurately by separating power and sense leads, avoiding voltage drop from test leads.

What components are included in the fixture system?

The fixture system includes a base plate, interface plate, and cover plate, with optional components like 40 socket fixture, connection lead sets, and Kelvin blades.

How should probes and pins be soldered?

Use a soldering iron with a tip temperature of 250 to 275°C for no more than three seconds to avoid deforming a Kelvin pin. Non-Clean solders like Multicore X38 are recommended.

Download PDF (1.4 MB)

More Voltech Manuals


View all Voltech manuals →