The R6015 Wood Moisture Meter is a device used to measure the moisture content of wood. It is made by the brand Reed.
This manual provides step-by-step instructions for operating the REED R6015 wood moisture meter. It explains how to take moisture measurements using built-in pins or a remote probe, with or without automatic temperature compensation. It also covers calibration checks, auto power-off settings, and care and maintenance procedures. The manual includes a calibration table for 170 wood species and a list of common timber species with their moisture content ranges.
| Measuring Principle | Electrical resistance |
|---|---|
| Measuring Range | 6 to 99.9% MC |
| Accuracy | ±1% MC |
| Moisture Electrode | 8mm long replaceable contact pins |
| Temp. Compensation | -31 to 176°F (-35 to 80°C) |
| Power Supply | 2 x AAA batteries |
| Dimensions | 7x 1.9 x 2” (180 x 50 x 31mm) |
| Weight | 6.1 oz (175g) |
The meter is calibrated for 20°C (68°F). For temperatures above 20°C, subtract 0.5% moisture per 5°C. For temperatures below 20°C, add 0.5% moisture per 5°C.
Press the (/) and > buttons together, then hold the (') button and press the B button to set the auto power-off time from 1 to 9 minutes or disable it.
Select scale A, disconnect the temperature probe, touch the calibrator poles with the needle, and check if the reading is between 17.7–18.3% for 'T' or 25.5–26.5% for 'B'.
The table provides moisture content values for 170 wood species, based on oven-drying tests, with scale A for building materials.