SC530 Service Manual, including product usage instructions, maintenance and repair information
This document is the official service manual for the Nilfisk SC530, a walk-behind commercial floor scrubbing machine designed for washing and drying hard surface floors. The machine is powered by on-board batteries and features a single-disc scrubbing pad, a controlled solution flow dosing system, and a rear squeegee with vacuum suction. It is intended for use by trained service personnel to maintain and repair the unit for optimum performance.
| Machine weight with empty tanks (without batteries) | 91 kg |
|---|---|
| Gross vehicle weight (GVW) | 208 kg |
| Solution tank capacity | 61 Liter |
| Recovery tank capacity | 61 Liter |
| Vacuum motor power | 350 Watt |
| Vacuum capacity | 1200 mm H2O |
| Climbing capacity (Max) | 2% |
| Working width | 530 MM |
| Squeegee width | 760 MM |
| Brush/pad diameter | 530/508 MM |
| Brush motor power | 450 Watt |
| Brush speed | 150 Rpm |
| Brush/pad pressure(Max) | 27 Kg |
| Drive motor power | 150 Watt |
| Working speed | 0-4.5 Km/h |
| Voltage | 24V |
| Battery | 12V 115AhC20 |
| Battery charger | 24V/13A |
Service and repairs must be performed only by authorized personnel or Nilfisk Service Centers.
You must specify the machine model and serial number when ordering repair parts.
In case of fire, use a powder fire extinguisher, not a water-based extinguisher.
Batteries should be charged only in well-ventilated areas and away from ignition sources or open flames.