NetBow™ Installation Manual
This guide explains how to install the NetBow™ irrigation arc for containers, including connection options to hub drippers like PCJ, PC, or UniRam™ with Dr. Zip™. It covers installation steps, adapter types, and spike configurations for different pot sizes and setups.
The NetBow™ is designed for high clogging resistance and even water distribution. It comes in 120mm and 250mm diameters with 4 or 8 outlets, and can be installed with either barb or Press-Fit connectors. Installation requires connecting a micro-tube to the hub dripper and placing the NetBow™ on the substrate surface with its spikes inserted.
| Compatible Container Size | 10-60 liters (2.5-15 gallons) |
|---|---|
| Diameter | 120, 250 mm (5, 10 inches) |
| Dripping Outlets | 4 and 8 respectively |
| Minimum Operating Pressure | According to hub dripper definitions |
| Maximum Recommended Pressure | 4.0 bar (58 PSI) |
| Hub Dripper Flow Rate | 2.0-8.0 l/h (0.53-2.11 GPH) |
Compatible with 10-60 liters (2.5-15 gallon) containers, and in many cases even smaller containers, depending on the pot geometry.
Available in 120mm (5 inches) and 250mm (10 inches) diameters.
Can be connected to PCJ, PC, or UniRam™ with Dr. Zip™ hub drippers.