This document is a quick installation guide for Moxa EDS-208 series Ethernet switches, which introduces the features and characteristics of the product
This guide provides step-by-step instructions for installing and wiring the Moxa EDS-208 Ethernet switch. It covers mounting on DIN-rail, power input connections, Ethernet port wiring, and LED indicators. The switch supports 10/100BaseT(X) and 100BaseFX ports, operates from 12 to 48 VDC, and is designed for industrial environments with IP30 protection and wide temperature tolerance.
Safety precautions are emphasized, including disconnecting power before wiring, separating power and signal cables, and using only specified wire types and torque ratings. The guide also explains auto-negotiation, store-and-forward switching, and LED status indicators for troubleshooting.
| Technology Standards | IEEE802.3, 802.3u, 802.3x |
|---|---|
| Processing Type | Store and Forward, with IEEE802.3x full duplex, non-blocking flow control |
| Address Table Size | 1,000 uni-cast addresses |
| Power Input Voltage | 12 to 48 VDC |
| Dimensions | 40 x 109 x 95 mm (W x H x D) |
| Weight | 170 g |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 70°C (-40 to 158°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
The EDS-208 accepts a power input voltage range of 12 to 48 VDC.
The EDS-208 operates reliably in a temperature range of -10 to 60°C.
The EDS-208 has 7 or 8 10/100BaseT(X) Ethernet ports and 1 or 0 100BaseFX fiber ports.
The EDS-208 operates in store-and-forward switching mode, which eliminates bad packets and enables peak performance under heavy traffic.