This manual introduces the features of the HL-45B solid-state HF/50MHz band 45W linear power amplifier, including frequency, output power, bandwidth, mode, working voltage, working temperature, etc.
The HL-45B is a solid-state linear power amplifier designed for HF/50MHz bands with a maximum output of 45W. It is optimized for use with Yaesu FT-817 radios, offering automatic band selection and send-receive switching via a special control cable. The amplifier uses RF MOS FET transistors (RD30HVF1) in a push-pull configuration for high reliability and includes over-voltage and over-drive protection. It features an LED power level meter and can be controlled remotely for band switching and ALC feedback. The unit requires a 13.8V DC power supply and is designed to comply with FCC regulations, automatically shutting down between 26.000 and 28.000 MHz.
Installation and operation require proper connection of the transceiver, antenna, and power supply. The amplifier can be used standalone or with compatible radios, with specific wiring for non-FT-817 models. Protection circuits prevent damage from excessive input power or voltage, and an ALC adjustment pot can be used to control output power and prevent distortion. Care should be taken to avoid high SWR conditions and to ensure proper ventilation and power supply stability.
| Frequency | HF Band (1.8 ~ 28MHz and 50MHz Amateur Bands) |
|---|---|
| Mode | SSB(A3E), CW(A1A), FM(F3E) |
| RF Output Power | SSB (PEP)/CW 45W (Typical maximum output) |
| RF Drive Power | 5W max. |
| DC Power | DC 13.8V, 8.5A max. |
| In/Out Impedance | 50Ω |
| In/Out Connectors | SO-239 |
| Dimensions | 150(W) x 47(H) x 211(D) mm (5.9 x 1.9 x 8.3 inches) |
| Weight | Approx. 1.6kgs. (3.4lbs.) |
The maximum output power is 45W (SSB/PEP or CW).
The designed RF drive power is 5W maximum.
It operates on HF Band (1.8 ~ 28MHz and 50MHz Amateur Bands).
It automatically shuts down between 26.000 and 28.000 MHz to comply with FCC Part 97 rules.