This is a service and repair manual for Sterilemax table top steam sterilizer Series 1118 LT1118X2
This service manual provides detailed instructions for servicing and repairing the Sterilemax LT1118X2 tabletop steam sterilizer. It covers safety precautions, technical specifications, component descriptions, and step-by-step procedures for replacing parts such as the heater, pump, solenoid valves, and temperature probes. The manual also includes troubleshooting guidance for common issues like erratic controls or power failures during cycles.
The sterilizer features a 12" x 18" chamber, 7-liter reservoir, and dual heating elements for sterilization and drying. It operates on 120V, 240V, or 100V power and includes an optional thermal printer for cycle logs. Safety features include automatic and mechanical over-temperature protection, pressure relief valves, and door switches to prevent operation with the door open.
| Chamber Size | 12" (304.8 mm) Diameter X 18" (457.2 mm) Depth |
|---|---|
| Overall Dimensions | 22 7/16” (569.9 mm) Width X 24 1/2” (622.3 mm) Depth X 17” (431.8 mm) Height |
| Tray Sizes | Large - 15 1/2” (393.7 mm) X 9 3/16” (233.4 mm); Small - 15 1/2” (393.7 mm) X 6” (152.4 mm) |
| Weight (Shipping) | 85 lbs. (39 kgs) |
| Electrical Voltage | 120V, 240V, or 100V |
| Heating Element Wattage | 1500W |
| Maximum Pressure Rating | 45 PSI |
| Reservoir Capacity | 7.0 Liters |
| Chamber Capacity | 1.2 cubic feet (34 liters) |
| Frequency | 50/60 HZ |
| Operating Temperature | 17°C - 27°C |
| Storage Temperature | -25°C - 65°C |
Turn the main power switch off, allow the unit to cool, then reset by pressing Stop and shutting off unit power.
The heating elements turn off, and the display shows "The Mechanical OTP Has Tripped. Shut off Unit Power And Reset. Caution - Unit Hot!!"
Distilled or low-grade deionized water with minimum 0.5 megohm/cm and maximum 1.5 megohm/cm conductivity.