FastMig MS 200, MS 300 is a welding machine produced by Kemppi. This operating manual contains important information on the use, maintenance and safety of the machine.
This manual explains how to operate and set up the Kemppi FastMig MS 200 and MS 300 control panels. It covers connecting the panels to wire feeders, adjusting welding parameters, selecting welding processes, and using error codes. Safety instructions and setup parameters are included to ensure correct and safe operation. The panels are designed for use with synergic power sources FastMig M 320, 420, or 520.
The manual also details functions like MIG dynamics adjustment, welding voltage and current control, and LED indicators for different welding modes. It includes notes on optional features like WiseRoot and WiseThin, which require separate licenses. Proper installation and safety procedures are emphasized to prevent damage and ensure user safety.
The panels are designed to be used only with synergic power sources FastMig M 320, 420, or 520.
Place the bottom edge of the panel behind the securing clips on the machine. Remove the fixing pin from the top edge, then gently push the upper part of the panel into place until it clips into position.
Adjusting MIG dynamics influences welding stability and spatter amount. Zero setting is recommended for basic use. Values from -1 to -9 create a softer arc for reduced spatter, while values from 1 to 9 create a harder arc for increased stability, especially with 100% CO₂ shielding gas.