Walchem WCT400/410 Series Cooling Tower Conductivity Controller Instruction Manual

Introduces the characteristics and features of the WCT400/410 series cooling tower conductivity controller


Walchem WCT400/410 Series Cooling Tower Conductivity Controller Instruction Manual - cover page
Brand
Walchem
Category
Other Electronics
Document type
User Manual
Language
English
Pages
43
File format
PDF
File size
680 KB
Published
18 October, 2023
Updated
18 October, 2023
MD5 checksum
73DAF549C49F13D59A02E425736350E4

About this manual

The Walchem WCT400 Series controllers offer conductivity and watermeter-based control of cooling tower water, control of corrosion/scale inhibitor feed, and with the WCT410 models, control of two biocide pumps. The controllers are microprocessor driven industrial type with on/off control outputs. A timed sample mode may be selected, and on small towers can reduce installation costs by eliminating the need for a sampling bypass line. An optional isolated 4-20 mA output that is proportional to the conductivity reading is available for all models. Any set point may be viewed without interrupting control. Each set point change will take effect as soon as it is entered. An access code is available to protect set point parameters, while still allowing settings to be viewed. The model WCT410 biocide outputs are scheduled on a user selectable 1, 2, or 4 week cycle. Each biocide output is independent and may be programmed for one add per day. (in 1, 2 or 4 week cycle) or up to 10 times per day (in daily cycle). It is possible to add both chemicals in the same day, however, as a safeguard they will not occur at the same time. Biocide outputs may use independent pre-bleeds and lockout times. All outputs are interlocked with a flow switch input. An alarm relay is provided with WCT410 models. It is triggered by: Low Conductivity reading High Conductivity reading No Flow situation Bleed Timeout Sensor Error Temp Error. Our unique USB feature provides the ability to upgrade the software in the controller to the latest version. An advanced USB capability option is available. The Config file feature allows you to save all the set points from a controller onto a USB flash disk, and then import them into another controller, making the programming of multiple controllers fast and easy. The data logging feature allows you to save the last 2 month's readings and events to a USB flash disk.

What's inside

  • Introduction
  • Specifications
  • Unpacking & Installation
  • Function Overview
  • Operation
  • Maintenance
  • Troubleshooting
  • Service Policy

Specifications

Conductivity Range0 - 10,000 µS/cm
Conductivity Resolution1 µS/cm
Conductivity Accuracy10 - 10,000 µS/cm ±1% of reading
Temperature Range32 - 158°F (0 - 70°C)
Input Power100-240 VAC, 50/60 Hz, 8A
Enclosure MaterialPolycarbonate
NEMA RatingNEMA 4X
Dimensions8.5" x 6.5" x 5.5"

Frequently asked questions

What is the conductivity range of the WCT400/410 controller?

The conductivity range is 0 - 10,000 µS/cm.

What triggers the alarm relay on WCT410 models?

The alarm relay is triggered by Low Conductivity reading, High Conductivity reading, No Flow situation, Bleed Timeout, Sensor Error, or Temp Error.

Can the software be upgraded?

Yes, the unique USB feature provides the ability to upgrade the software in the controller to the latest version.

Download PDF (680 KB)

More Walchem Manuals


View all Walchem manuals →