This document is an instruction manual for the EZ Series Electronic Metering Pump. It describes the features and characteristics of the product.
The Walchem EZ Series electronic metering pump consists of a pump unit, a drive unit, and a control unit. The drive unit utilizes an electromagnetic solenoid to move an armature shaft, which actuates a PTFE-faced diaphragm to force liquid out through discharge check valves. When the solenoid is de-energized, a spring returns the armature, creating a vacuum that refills the pump head from the supply tank.
This document covers the complete lifecycle of the pump, including safety precautions, model code interpretation, and detailed specifications for various sizes and liquid end materials. It provides step-by-step instructions for installation, such as selecting a location with flooded suction, connecting supply and discharge tubing, and performing electrical connections. The guide also details operational procedures like priming, calibration, and the use of the STOP function, as well as maintenance tasks like diaphragm and valve replacement.
| Maximum Output Capacity (B16) | 1.0 Gal/hr (65 mL/min) |
|---|---|
| Maximum Pressure (B16) | 105 PSI (0.7 MPa) |
| Frequency adjustment range | 0 to 360 strokes per minute |
| Operating Ambient Temperature | 32°F to 122°F (0°C to 50°C) |
| Liquid Temperature (PVC based) | 32° to 104°F (0 to 40°C) |
The total suction lift should not exceed 5 ft (1.5m).
Yes, pumps are pre-primed with water at the factory.
The B16 model has a maximum output capacity of 1.0 Gal/hr (65 mL/min).