This is an aircraft manual.
This manual provides detailed instructions for assembling the Hangar 9 Ultra Stick 40 ARF model airplane. It covers parts inspection, tools and adhesives required, and step-by-step installation of components like wings, tail, landing gear, and engine. Sections include specific guidance for both standard aileron and quad flap configurations. Safety and warranty information is also included.
The manual is organized by major assembly sections with check boxes to track progress. It includes specifications such as wingspan (57.75 in), length (51 in), weight (5–6 lb), and engine options (2- or 4-stroke). Recommended radio systems and optional equipment are listed for setup.
| Wingspan | 57.75 in (1467mm) |
|---|---|
| Length | 51 in (1295mm) |
| Wing Area | 700 sq in (715 with quad flaps) |
| Weight | 5–6 lb (2.3–2.7 kg) |
| Radio | 4-channel or greater |
| Engine | 40–.46 2-stroke, .56–.82 4-stroke |
Spektrum Radio System (recommended) • DX6i 6-channel radio or greater with receiver (SPM6600).
40–.46 2-stroke, .56–.82 4-stroke.
Drill, epoxy brush, felt-tipped pen, hobby knife with #11 blade, low-tack tape, sandpaper, mixing cup, mixing stick, paper towel, Phillips screwdriver: #1, #2, pencil, pin vise, pliers, rotary tool, rubbing alcohol, ruler, diagonal cutters, string, threadlock, T-pin, sanding drum, foam rubber, 1/4-inch (6mm), nut driver or box wrench: 1/4-inch, box wrench to fit propeller nut, box end or open end wrench: 10mm (2), hex wrench or ball driver: 1.5mm, 2.5mm, 3/32-inch, 9/64-inch, drill bit: 1/16-inch (1.5mm), 5/64-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 11/64-inch (4.5mm), 7/32-inch (5.5mm).
30-Minute Epoxy (HAN8002), Medium CA (PAAPT02), Thin CA (PAAPT08).