Key facts
- Manuals
- 16
- Models
- 1
- Languages
- EN
- Last added
- 2023-10-19
Hangar 9 models by category
Featured Hangar 9 manuals
Hangar 9 Cessna 182 Skylane 1.50 ARF Assembly Manual
This manual provides detailed assembly instructions for Hangar 9’s Cessna 182 Skylane 1.50 ARF model airplane. It covers everything from hinging ailerons and flaps to installing servos, landing gear, engine, and radio. The document includes a table of contents, parts lists, tool and adhesive requirements, and safety warnings. It also features step-by-step procedures with photos and notes on proper techniques, such as using thin CA glue for hinges and epoxy for flap mounts. The manual is intended for modelers with some experience, as it includes challenging construction features.
Covers: Warranty Information · Contents of Kit · Additional Required Equipment · Warning · Other Items Needed · Additional Required Adhesives and Tools
Hangar 9 Taylorcraft 26cc BNF Assembly Manual
This manual provides step-by-step assembly instructions for the Hangar 9 Taylorcraft 26cc BNF, a giant-scale recreation of a clipped-wing T-Craft. The kit includes a Zenoah G26 gas engine, Spektrum AR8000 receiver, and Spektrum A6000 servos pre-installed. Users must assemble the airframe, install the landing gear and tail, and bind the radio system to a compatible 6+ channel DSM2 or DSMX transmitter.
Covers: Safety Precautions and Warnings · Included Parts Listing · Binding Procedure - BNF · Landing Gear Installation · Tail Installation · Engine Installation
Hangar 9 Phoenix 7 ARF Assembly Manual
This manual provides step-by-step assembly instructions for the Hangar 9 Phoenix 7 ARF, a high-performance radio-controlled pattern aircraft designed by Don Lowe. The kit includes the fuselage, wings, stabilizers, landing gear, engine mounts, and various nylon parts and hardware required for construction. The document guides the user through installing components such as servos, landing gear (fixed or retractable), engine, and control linkages.
Covers: Intro · Included Parts Listing · Safety Precautions and Warnings · Aileron Servo Installation · Main Gear Installation · Stabilizer Installation
Hangar 9 FuntanaS 90 3D ARF Assembly Manual
This manual provides detailed instructions for assembling the Hangar 9 FuntanaS 90 3D ARF model airplane. It covers everything from initial inspection of parts to final radio setup. The aircraft is designed for aerobatic 3D flight with lightweight wood construction and large control surfaces. The manual includes sections for installing servos, wings, stabilizers, landing gear, engine, and more. It also lists required tools, adhesives, and warning information for safe assembly and operation.
The manual is divided into 21 sections, each with step-by-step instructions and diagrams. It includes a table of contents, covering colors, required equipment, and safety warnings. The document also specifies compatible radio and engine systems, including recommended JR® systems and engines like .61 2-stroke and 1.00 4-stroke. It provides detailed specifications such as wingspan, weight, and control surface dimensions.
Covers: Table of Contents · Covering Colors · Required Radio and Engine · Contents of Kit · Additional Required Equipment (not included) · Additional Required Tools and Adhesives
Latest Hangar 9 manuals
Hangar 9 Cessna 182 Skylane 1.50 ARF Assembly Manual
User Manual 52 pages · 770 KB · ENStep-by-step assembly guide for Hangar 9’s 1.50-scale Cessna 182 Skylane ARF model, including parts, tools, and construction instructions.
Hangar 9 Taylorcraft 26cc BNF Assembly Manual
User Manual 36 pages · 2.2 MB · ENAssembly and operation instructions for the Hangar 9 Taylorcraft 26cc BNF giant-scale model aircraft, including engine installation and radio binding.
Hangar 9 Phoenix 7 ARF Assembly Manual
Other 48 pages · 3.4 MB · ENAssembly instructions for the Hangar 9 Phoenix 7 ARF radio-controlled pattern aircraft, including parts lists, installation steps, and safety warnings.
Hangar 9 FuntanaS 90 3D ARF Assembly Manual
User Manual 44 pages · 672 KB · ENStep-by-step guide for assembling the Hangar 9 FuntanaS 90 3D ARF model airplane, including parts, tools, and installation instructions.
Hangar 9 P-51 PTS Mustang Mk II Assembly Manual
User Manual 40 pages · 4.9 MB · ENStep-by-step guide for assembling the Hangar 9 P-51 PTS Mustang Mk II model airplane, including parts, tools, and flight prep.
Hangar 9 Super Stick .40/.60 Model Aircraft Assembly Manual
User Manual 40 pages · 743 KB · ENStep-by-step guide to assemble and prepare Hangar 9 Super Stick .40/.60 model airplane for flight, including wing assembly, gear installation, and…
Hangar 9 RV-8 Assembly Manual
User Manual 48 pages · 3.6 MB · ENStep-by-step guide for assembling the Hangar 9 RV-8 model airplane with 2- or 4-stroke engine options.
Hangar 9 B-25 Mitchell ARF Assembly Manual
User Manual 80 pages · 4.6 MB · ENStep-by-step guide for assembling the Hangar 9 B-25 Mitchell ARF model airplane with glow or electric power options.
Hangar 9 HAN135 ProSeal™ Covering Iron Instruction Manual
User Manual 2 pages · 36 KB · ENUser manual for Hangar 9 HAN135 ProSeal™ covering iron with safety warnings, operation steps, and maintenance instructions.
Hangar 9 Sport Star Strike R/C Aircraft Instruction Manual
User Manual 60 pages · 785 KB · ENStep-by-step guide to assemble and fly the Hangar 9 Sport Star Strike RC airplane, including wing assembly, engine installation, and pre-flight checks.
Hangar 9 CAP 232 ARF Instruction Manual
User Manual 44 pages · 721 KB · ENAssembly and operating instructions for the Hangar 9 CAP 232 90% pre-built RC aircraft kit.
Hangar 9 Xtra Easy Model Airplane Assembly Manual
User Manual 15 pages · 385 KB · ENStep-by-step guide for assembling the Hangar 9 Xtra Easy model airplane, including wing, tail, and landing gear installation.
Hangar 9 P-40B Warhawk 50 ARF Assembly Manual
User Manual 48 pages · 3.6 MB · ENStep-by-step guide for assembling the Hangar 9 P-40B Warhawk 50 ARF model airplane with safety warnings and component lists.
Hangar 9 Christen Eagle II 90 ARF Assembly Manual
User Manual 36 pages · 2.5 MB · ENStep-by-step guide for assembling the Hangar 9 Christen Eagle II 90 ARF model airplane with safety warnings and component lists.
Hangar 9 Ultra Stick 40 ARF Assembly Manual
User Manual 48 pages · 3.6 MB · ENStep-by-step guide to assemble the Hangar 9 Ultra Stick 40 ARF model airplane, including parts list, tools, and installation instructions for wings, tail…
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Hangar 9 manuals
What tools and adhesives are required for assembly?
Tools include drill, screwdrivers, pliers, hobby knife, and measuring device. Adhesives include CA glue (thin and medium), canopy glue, 6-minute epoxy, and 30-minute epoxy.
What is the recommended engine for this model?
Recommended engines include Zenoah® G26 gas engine, 1.20–1.80 4-cycle engines, and 1.08–1.48 2-cycle engines.
What transmitter is required to fly this model?
A 6+ channel DSM2 or DSMX aircraft transmitter is required.
Is the engine included in the kit?
Yes, the kit comes with a Zenoah G26 gas engine pre-installed.
What is the wingspan of the Phoenix 7?
The wingspan is 63.0 inches (160cm).
What engine size is recommended for this model?
A .52–.61 2-stroke engine is required.