Demaeng I-1066 water proportion injector is a proportion injector that injects liquid additives into the water system in direct relation to the amount of water that passes through the motor. The product is water-driven and does not require external power.
The Demaeng I-1066 is a water-powered proportional injector designed to inject liquid additives into a water system based on flow volume. It operates using a water engine and piston mechanism, requiring no external power source. The device is suitable for flow rates ranging from 20 L/H to 3,175 L/H and operates within a water pressure range of 0.2 to 8 Bar.
| Flow rate range | 20 L/H (0.088 GPM) to 3,175 L/H (14 GPM) |
|---|---|
| Operating temperature | 4°C (39°F) to 40°C (104°F) |
| Water pressure range | 0.2 Bar to 8 Bar (2.9 to 120 PSI) |
| Additive dosing range | 0.03% to 10% |
| Connection type | 3/4" NPT male thread |
No, the MixRite is powered by water flow and does not require external power.
The MixRite operates with a minimum flow rate of 20 L/H (0.088 GPM) and up to 3,175 L/H (14 GPM), subject to the model.
The unit operates when the temperature is not lower than 4°C (39°F) and not higher than 40°C (104°F).
The MixRite requires a water pressure between 0.2 Bar to 8 Bar (2.9 to 120 PSI).