This document provides a detailed description of the hardware configuration, pin definitions, and technical specifications of the Emtronix ESM7000 industrial control board series.
The Emtronix ESM7000 is an industrial control board based on the NXP i.MX 7D ARM Cortex-A7 dual-core processor running at 1GHz. It features 1GB of DDR3 system memory and 4GB of eMMC storage, designed to comply with the Emtronix Smart Module Architecture (ESMARC) connection standard. The board supports various display interfaces, including 18-bit parallel RGB and LVDS, as well as resistive and capacitive touch screens.
The document provides comprehensive technical details, including a block diagram, pin definitions for the CN1 and CN2 connectors, and system configuration options. Key specifications include multiple communication interfaces such as Gigabit Ethernet, CAN 2.0B, UART, I2C, SPI, and USB 2.0. The datasheet also outlines design considerations, such as power requirements, ESD protection limits, and GPIO drive capabilities. This manual is written in Chinese.
| Processor | NXP i.MX 7D ARM Cortex-A7 Dual Core |
|---|---|
| CPU Frequency | 1GHz |
| System Memory | 1GB DDR3 |
| Storage | 4GB eMMC |
| Ethernet | 1 Gigabit + 1 100Mbps |
| CAN Interfaces | 2 x CAN 2.0B |
| UART Ports | 6 x UART (up to 3Mbps) |
| GPIO | 32-bit (GPIO0 – GPIO31) |
| USB Host | 4 x USB 2.0 (ESM7000) |
| Operating Temperature | -40°C to +80°C |
| Board Dimensions | 74mm x 54mm |
The board operates within a temperature range of -40°C to +80°C.
No, the PCIe x1 high-speed interface supporting M.2 NVMe SSDs is only available on the ESM7100 model.
The digital IO input voltage limit is 3.6V; exceeding this may damage the CPU.