This document is the installation and operations manual for Models A2 and A5 Eletta Flow Monitor, providing information on the features and characteristics of the products.
The Eletta Flow Monitor models A2 and A5 are instruments designed to control and measure the flow of liquids and gases in pipes ranging from 15 mm to 500 mm. Based on the differential pressure principle, these monitors utilize interchangeable orifice plates to achieve an accuracy of at least +/-5% Full Scale when installed correctly. The device consists of a Pipe Section mounted in the process line and a Control Unit that displays flow via a 20-segment bar graph and provides a 4-20 mA analog output.
| Accuracy | <+/- 5 % F.S |
|---|---|
| Repeatability | < 2 % on actual value |
| Max Pressure | 16 bar |
| Min Line Pressure | 0.7 - 1.0 bar |
| Control Unit Temperature | 0°C to 65°C |
| Power Supply | 24 VDC +/- 10% |
| Output Signal | Isolated Analog current 4 - 20 mA |
The monitors provide an accuracy of at least +/-5% Full Scale if installed correctly.
The maximum pressure rating is 16 bar (232 PSI).