The document describes an advanced high-speed CMOS octal D-type flip-flop with 3-state outputs non-inverting. It is fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology, and it features high noise immunity, low power dissipation, and low noise.
The 74VHC574 is an advanced high-speed CMOS octal D-type flip-flop with 3-state non-inverting outputs. It is fabricated with sub-micron silicon gate and double-layer metal wiring CMOS technology. The device is controlled by a clock input (CK) and an output enable input (OE). On the positive transition of the clock, the Q outputs are set to the logic states that were setup at the D inputs. While the OE input is low, the 8 outputs are in a normal logic state; while high, the outputs are in a high impedance state. Power down protection is provided on all inputs, allowing 0 to 7V to be accepted on inputs with no regard to the supply voltage. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity.
| Max Clock Frequency (VCC=5V, CL=15pF) | 180 MHz |
|---|---|
| Quiescent Supply Current (Max) | 4 µA |
| Operating Voltage Range | 2V to 5.5V |
| ESD Immunity | 2KV |
The device operates with a supply voltage range of 2V to 5.5V.
Yes, the device can be used to interface 5V to 3V systems.
It is an octal D-type flip-flop, meaning it has 8 outputs (Q0 to Q7).