The TS4962M is a 3W filter-free class D audio power amplifier. Its main features include: operating voltage range of VCC = 2.4V to 5.5V; standby mode low level; output power of 3W, load of 4 Ω, THD+N maximum of 10%; output power of 2.3W, voltage of 5V, load of 4 Ω, THD+N maximum of 1%; output power of 1.4W, voltage of 5V, load of 8 Ω, THD+N maximum of 1%; gain can be adjusted via external resistors; low current consumption of 2mA @ 3V; efficiency of 88% typical; signal to noise ratio of 85dB typical; PSRR of 63dB typical @217Hz with 6dB gain; PWM base frequency of 250kHz; low pop & click noise; thermal shutdown protection; available in flip-chip 9 x 300μm (Pb-free).
The TS4962M is a differential Class-D BTL (Bridge-Tied Load) power amplifier designed to drive up to 2.3W into a 4Ω load or 1.4W into an 8Ω load at a 5V supply voltage. It operates from a supply voltage range of 2.4V to 5.5V and achieves high efficiency, typically around 88%. The device includes features such as adjustable gain via external resistors, low pop & click noise circuitry for fast startup within 5ms, and an active-low standby function that reduces current consumption to approximately 10nA.
| Supply voltage range | 2.4V to 5.5V |
|---|---|
| Output power (4Ω, 10% THD+N) | 3W |
| Output power (8Ω, 10% THD+N) | 1.75W |
| Typical efficiency | 88% |
| Signal to noise ratio (A-weighted) | 60dB (4Ω) / 57dB (8Ω) |
| PWM base frequency | 250kHz |
The device reduces current consumption to approximately 10nA in standby mode when the standby pin is active low.
The gain is adjustable via two external resistors, calculated using the formula Gain = 300kΩ/Rin.
The device operates in a free-air temperature range of -40°C to +85°C, with storage temperatures from -65°C to +150°C.