ISL28148, ISL28248 and ISL28448 are 4.5MHz low-power single, dual and quad operational amplifiers. The parts are optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries. The single, dual and quad feature an Input Range Enhancement Circuit (IREC) which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail. The parts draw minimal supply current (900µA per amplifier) while meeting excellent DC accuracy, AC performance, noise and output drive specifications. The ISL28148 features an enable pin that can be used to turn the device off and reduce the supply current to a maximum of 16µA. Operation is guaranteed over -40°C to +125°C temperature range.
The document describes the ISL28148, ISL28248, and ISL28448 as 4.5MHz low-power operational amplifiers optimized for single supply operation from 2.4V to 5.5V. These devices feature an Input Range Enhancement Circuit (IREC) allowing inputs to swing slightly above the positive supply while maintaining common-mode rejection ratio performance, and offer rail-to-rail output operation.
| Gain Bandwidth Product | 4.5MHz |
|---|---|
| Supply Current (per amp) | 900uA |
| Offset Voltage Max | 1.8mV |
| Input Bias Current Typ | 1pA |
| Supply Voltage Range | 2.4V to 5.5V |
| Operating Temperature | -40°C to +125°C |
The parts support single supply operation down to 2.4V.
The supply operating range extends up to 5.5V.
The parts draw a maximum of 900uA per amplifier.