The ISL317XE are ±15kV IEC61000 ESD Protected, 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents, allowing up to 256 transceivers on the network without violating the RS-485 specification’s maximum limit. The receivers feature a Full Fail-Safe design and the transceivers have hot plug circuitry to ensure stable operation. Slew rate limited versions reduce EMI and minimize reflections from improperly terminated transmission lines. The ISL3170E through ISL3175E also include receiver input filtering to enhance noise immunity in the presence of slow input signals.
The document describes the Intersil ISL3170E through ISL3178E family of transceivers designed for balanced communication meeting RS-485 and RS-422 standards. These devices feature +15kV IEC61000 ESD protection, full fail-safe receiver inputs that output a logic high if floating or shorted, and hot plug circuitry to keep outputs in a high impedance state during power-up.
The ISL3170E is configured for full-duplex applications with separate Rx input and Tx output pins. It utilizes slew rate limited drivers to reduce EMI and minimize reflections from improperly terminated transmission lines. The device supports data rates up to 20Mbps (for specific models in the series) and allows up to 256 devices on a bus due to its true 1/8 unit load characteristic.
| ESD Protection (RS-485 I/O Pins) | +15kV |
|---|---|
| ESD Protection (Other Pins) | >7kV HBM |
| Supply Voltage | Single 3.3V Supply |
| Max Data Rate (ISL3176E/ISL3178E) | 20Mbps |
| Max Quiescent Supply Current | 80µA |
| Shutdown Supply Current | 10nA |
| Common Mode Input/Output Voltage Range | -7V to +12V |
Up to 256 devices can be connected without violating the specification's 32 unit load maximum.
The receiver features a Full Fail-Safe design that ensures a logic high Rx output if inputs are floating, shorted, or terminated but undriven.
Hot Plug circuitry ensures that the Tx and Rx outputs remain in a high impedance state while the power supply stabilizes.