This is the user manual of YMLT200 1050 server, which introduces the system characteristics, unpacking and inspection, basic usage common sense, hardware installation instructions, etc.
The manual begins with safety precautions and warnings, then gives an overview of the LT200 1050 server’s hardware architecture, including CPU, memory, storage, PCI/PCI‑E, networking, power and cooling subsystems.\nIt continues with detailed hardware installation procedures, basic usage instructions, preventive maintenance, software considerations, and a comprehensive FAQ that addresses common power‑up, BIOS, fan and driver issues. This manual is written in Chinese.
| Power Input Voltage | 220V ±10% 50Hz (supports 110V) |
|---|---|
| Maximum Power‑Cable Length | 4.5 m |
| Operating Temperature | 10 °C – 35 °C |
| Operating Humidity | 35 % – 80 % |
| CPU Socket | LGA775 |
| PCI Express Slots | 2 × PCI‑E x4, 1 × PCI‑E x8 |
Check that the power LED is on, verify the power strip and cable, ensure the power switch is on, confirm the monitor works, and reseat the CPU and memory if needed.
The BIOS has an auto‑power‑on setting that starts the system when power is restored after an abnormal shutdown.
Check that the fan’s connector is properly seated, verify the fan cable, and replace the fan if it is damaged.
Install Windows 2000 Service Pack 4 first, then load the USB 2.0 driver.