AXIS P5532-E PTZ Dome Network Camera Installation Guide, introduces the installation method of the product
The Installation Guide explains how to install the Axis P5532‑E and P5534‑E PTZ dome network cameras on a network, covering safety, package verification, hardware assembly, and initial configuration.
Key steps include checking package contents, removing the protective packaging, installing or replacing the dome cover, inserting an optional SDHC card, mounting the camera, assigning an IP address, and setting a password. The guide also notes regulatory compliance, battery replacement, and support resources.
| Battery type | 3.0V CR2032 Lithium |
|---|---|
| Network connector rating | IP66 |
| SD card slot | SDHC (Secure Digital High Capacity) |
| H.264 decoder license | One (1) license included |
| Supported video frequencies | 60 Hz / 50 Hz |
The camera uses a 3.0 V CR2032 Lithium battery that typically lasts at least five years and should only be replaced when a low‑battery warning appears.
Remove the sunshield and top cover, insert the SD card into the SDHC slot, then re‑attach the top cover and sunshield. Unmount the card via the web interface before removal.
Use the original packaging for transport, avoid vibration or heavy pressure, use hand tools only, do not use chemicals for cleaning, and only use accessories recommended by Axis.