This guide provides step‑by‑step instructions for installing the Sampo LX-UA143 fixture using a T‑BAR frame or a tube‑type mounting. It explains how to place the fixture, connect the wiring seat to power, and secure the unit on the mounting structure.
Safety precautions are highlighted, including keeping power off during installation, avoiding direct contact with live parts, not washing the fixture with water, and keeping flammable materials away. Troubleshooting tips describe how to check wiring and lamp sockets if the fixture does not illuminate, and provide a service hotline for further assistance. This manual is written in Chinese.
| Rated voltage | AC 110V/220V |
|---|---|
| Frequency | 60Hz |
| Input current | 0.44A/0.22A |
Place the fixture inside the T‑BAR frame, connect the wiring seat to the power source, and then secure the fixture on the T‑BAR.
Ensure the power is turned off, avoid direct contact with live parts, keep flammable materials away, do not wash the fixture with water, and use a soft cloth for cleaning.
Check that the wiring is properly connected and not damaged, verify the lamp socket, and if the problem persists, contact the service hotline at 04‑2236‑6157.