The QM-AN-01 emergency start/stop box provides emergency start/stop control signals to the gas fire control system, and has running indication and fire alarm indication functions.
The QM AN-01 Emergency Start/Stop Box supplies emergency start and stop signals to a gas fire‑extinguishing controller. It is mounted outside the protected area exit and uses a keyed rotary switch for manual activation.
The manual lists technical parameters, wiring diagrams, terminal assignments, installation dimensions, and safety precautions. It also describes the required power cable size and advises that installation and commissioning be performed by qualified personnel. This manual is written in Chinese.
| Operating Temperature | -10 °C to +55 °C |
|---|---|
| Maximum Humidity | ≤95 % (40 °C ±2 °C, no condensation) |
| Working Voltage | DC 24 V |
| Working Current | <100 mA |
| Contact Rating | <2 A / 24 V |
| Power Cable Minimum Size | ≥1.5 mm² BV cable |
It operates on a 24 V DC supply.
Rotate the stop key to the stop position, which opens contacts 3 and 4 and interrupts the release signal.
Use a BV cable of at least 1.5 mm² cross‑section for the power line.
The device can operate from –10 °C up to +55 °C.