This instruction manual introduces the features, technical parameters, installation dimensions, wiring terminals, electrical wiring diagrams, installation and debugging, safe use and maintenance of the LAMMIN LLP6993-01B/C power dimmer
The LAMMIN LLP6993-01B/CL is a power dimmer that can be controlled by a rotary knob or a 1‑10 V DC signal. It supports incandescent, 230 V halogen, and low‑voltage halogen lamps with a maximum output of 3 kW (01BL) or 4 kW (01CL). Features include an emergency manual button, status indicator, multiple temperature protections, accurate dimming ratio, and DIN‑rail mounting.
The manual details installation dimensions, terminal layout, wiring connections, and an electrical wiring diagram. Safety instructions cover ventilation, overload prevention, moisture and dust protection, and proper grounding. Emergency operation is performed by holding the manual button, which causes the indicator to flash rapidly and the output brightness to cycle from 0 % to 100 %. This manual is written in Chinese.
| Input Voltage | 230 V ±10 %, 50 Hz |
|---|---|
| Signal Input | 1‑10 V DC |
| Output Power | 3 kW (01BL) / 4 kW (01CL) |
| Output Current | 15 A (01BL) / 20 A (01CL) |
| Dimmer Rise Time | ≥ 220 µs |
| Weight | 1.3 kg (01B) / 1.5 kg (01C) |
| Protection Rating | IP20 |
| Operating Temperature Range | 0 °C – +45 °C |
| Mounting Method | 35 mm DIN rail |
| Standards | CE, UL |
| Minimum Load | 40 W |
Connect the AC220‑240 V supply through a suitable circuit breaker to the L (phase) and N (neutral) terminals, and ensure proper grounding as shown in the wiring diagram.
Press and hold the emergency button; the indicator flashes rapidly and the output brightness cycles from 0 % to 100 % and back. A short press returns to normal operation.