MODEL 6017 is a multi-function tester that can perform insulation resistance tests on low-voltage equipment below 600 V; ground resistance tests on wiring and electrical appliances; and AC voltage and ground voltage tests.
This manual introduces the Gongli 6017 multi‑function tester, covering safety precautions, key features, technical specifications and the instrument layout. It guides users through battery installation, range selection, test lead connection and the use of optional accessories.
Detailed procedures for insulation resistance, ground resistance, AC voltage and earth voltage testing are provided, along with instructions for probe head replacement, ground‑wire adapter handling, cleaning, and troubleshooting common faults. This manual is written in Chinese.
| Insulation resistance test ranges (M‑6017) | 125 V / 250 V / 500 V |
|---|---|
| Ground resistance test ranges (precision) | 12 Ω / 120 Ω / 1200 Ω |
| Input resistance (insulation mode) | 2.8 MΩ at 600 V |
| Power source | 8 × 3 V dry cells, 3.5 VA |
Turn the range switch to OFF, remove the test leads, open the battery cover, insert eight new 3 V dry cells, then close the cover and tighten the screws.
Do not measure in circuits above AC 600 V, avoid combustible environments, and ensure the circuit breaker is in the second‑stage when testing large currents.
Select the appropriate voltage range (125 V, 250 V or 500 V), fully insert the test leads, ensure the instrument is set to OFF before connecting, then press the test switch to start the measurement.