ELOTEX® FLEX8300 is a redispersible powder based on acrylic copolymer. It has the characteristics of no plasticizer, no solvent and no film former. The product is mainly used for the modification of water-hardening cementitious material systems, especially suitable for systems requiring high flexibility and high wet and dry strength, such as flexible waterproofing mortar.
ELOTEX FLEX8300 is a re‑dispersible powder based on acrylic ester copolymer, intended for modification of water‑hardening cementitious systems, especially flexible waterproof seal mortars. It offers good workability, reduced water demand, excellent flexibility and adhesion, low water absorption and high impermeability.
The manual lists technical specifications such as bulk density, moisture content and pH, describes recommended packaging (20 kg paper bags with polyethylene liner), storage conditions (below 25 °C, dry place, use within six months), and safety and environmental compliance information. This manual is written in Chinese.
| Appearance | white powder |
|---|---|
| Bulk density | 400 – 600 g/L |
| Residual moisture | max 1.0 % |
| pH (10 % dispersion) | 7.0 – 9.0 |
| Ash (TGA, 1000 °C) | 12.7 % ± 1.5 % |
| Glass transition temperature | -18 °C |
| Minimum film formation temperature | +0 °C (after dispersion) |
| Standard packaging | 20 kg paper bag with polyethylene liner |
| Recommended storage temperature | below 25 °C, dry place |
| Shelf life after packaging | use within 6 months |
Store the product in a dry location at temperatures below 25 °C.
It should be used within six months of packaging.
No, the product contains neither plasticizers nor solvents.
The bulk density is between 400 and 600 g per litre.