Elotex AD0110 is a special redispersible polymer powder that can be used to modify gypsum-based fillers and trowels in low temperatures and high humidity conditions. It has good redispersibility, which can reduce the water requirement during mixing, prolong the open time, improve adhesion strength, enhance cohesion strength and dry surface abrasion performance.
ELOTEX AD0110 is a special re‑dispersible polymer adhesive powder designed for modifying gypsum‑based joint compounds and plaster mortars under low‑temperature and high‑humidity conditions. The manual details its appearance, bulk density, moisture content, pH, film‑forming temperature, and film properties.
The document also covers proper mixing procedures, recommended packaging (20 kg paper bags with polyethylene liner), storage conditions (below 25 °C, use within 6 months), and safety compliance with EU 88/379/EEC regulations. Contact information for AkzoNobel Specialty Chemicals (Shanghai) is provided for further assistance. This manual is written in Chinese.
| Bulk density | 450 – 550 g/L |
|---|---|
| Residual moisture | max 1.0% |
| Ash content (1000 °C) | max 1.0% |
| pH (10 % dispersion water solution) | 5.0 – 6.0 |
| Minimum film‑forming temperature | ~ +5 °C |
| Film properties | opaque, plastically adhesive |
| Standard packaging | 20 kg paper bag with polyethylene liner |
| Recommended storage temperature | below 25 °C |
| Shelf life | use within 6 months |
Store the product in a dry place at a temperature below 25 °C.
The product should be used within six months of manufacture.
The bulk density is specified as 450 to 550 g per litre.
Yes, it complies with EU regulation 88/379/EEC and is classified as a non‑toxic product.