This document is an operation manual for the GSK928TB lathe CNC system. The manual provides information on programming, axis definition, coordinate system, programming format, and quick positioning path. It also introduces various G functions, including rapid positioning, linear cutting, circular arc cutting, and thread cutting. The manual covers system parameter settings, manual operation, and automatic operation.
This manual provides detailed instructions for programming the GSK 928TB lathe CNC system, including axis definitions, coordinate systems, G‑ and M‑functions, and program structure. It also describes manual, automatic and editing modes, as well as parameter settings and system states.
The later sections contain system performance data, error handling, and extensive installation and wiring diagrams for connecting the controller, motors, encoders and auxiliary devices. This manual is written in Chinese.
| Coordinate resolution | 0.01 mm |
|---|---|
| Programming range | ±99999.99 mm |
| X‑axis unit conversion | 0.005 mm per 0.01 unit |
| Z‑axis unit conversion | 0.01 mm per 0.01 unit |
Use the G93 command to set the coordinate offset before programming the part.
The F field specifies feed rate in mm/min for G98 mode or mm/rev for G99 mode.